Product Summary The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports
three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio.
Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own
pace - whether you are intent on going fully digital, undecided about which digital system to
pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can
simultaneously support two digital protocols plus analog, offering the following combinations:
FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.
Features:
- Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2)
- Any combination of two digital protocols may be selected from NXDN, DMR, and P25
- Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
- Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses
- Easy to follow GUI for at-a-glance operational status and Multi-line Text to convey information
- 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control
- Built-In GPS Receiver/Antenna for effective fleet management
- Bluetooth® Module Built-in for hands-free operation
- Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
- Built-in 56-bit DES Encryption
- Optional 256-bit AES Encryption
- Built-in Motion Sensor for man down detection
- microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data""
- IP67/68 and MIL-STD-810 C/D/E/F/G
- 6 W (136-174 MHz ) Models
- 5 W (380-470, 450-520 MHz) Models
- 3 W (700/800 MHz) Models
- Full Key Models (w/numeric keypad) and Standard Key Models (w/o numeric keypad)
- Maximum of 1024 CH, 128 Zones (4000 Ch. Opt)
- 1 W Speaker Audio
| Product Summary This adaptable mobile radio supports both NXDN® and DMR digital protocols as well as mixed digital/FM analog operation, enabling it to serve with distinction in a wide range of enterprise and operation-critical applications. Designed with flexibility in mind, it's packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. The NX-5700S/5800S gives you the freedom to migrate at your own pace - whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog. Additionally, for expansion capability a software license certification system facilitates extensive customization.
Features:
- Multi-protocol digital radio: Designed to operate under NXDN® or DMR digital, and FM analog protocols
- Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
- Large, 2.55" (154 x 422 pixels) TFT Display for at-a-glance operational status
- Easy to follow GUI and Multi-line Text to convey information
- Built-In GPS Receiver for effective fleet and incident management
- Bluetooth® Module Built-in for hands-free and IoT applications operation
- Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
- Built-in 56-bit DES Encryption
- Optional 256-bit AES Encryption
- microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data"
- 50 W to 5 W (136-174 MHz) Models
- 45 W to 5 W (380-470, 450-520 MHz) Models
- Maximum of 1024 CH/Zone, 128 Zones
- DB-25 Accessory Connector
- AMBE+2™ Enhanced Vocoder
- 4 W Speaker Audio
- Voice Announcement
- Dual Priority Scan
- Multi-Zone Scan
- Adjustable Audio Profiles
- Emergency Profiles
- Front Panel Programming
| Product Summary This adaptable mobile radio supports both NXDN and DMR digital protocols as well as mixed digital & FM analog operation, enabling it to serve with distinction in a wide range of enterprise- and operation-critical applications.Designed with flexibility in mind, it's packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. And providing greater freedom of installation, the radio's front panel can be used as a remote control head (this requires an optional accessories). Additionally, for expansion capability a software license certification system facilitates extensive customization. PRODUCT HIGHLIGHTS - Multi-protocol digital radio: Designed to operate under an NXDN or DMR digital, and FM analog protocols
- Mixed Digital & FM Analog Operation allows gradual migration at your own pace
- 4-Line Basic Frame (2 lines of icon & key guide) / 14 Characters
- 4-Line Text Message Frame (2 Lines of Text, icon & key guide) Note: The number of lines may vary depending on the display language (character set).
- 7-Color LED indicator
- External and Internal Speaker Switching
- Built-in GPS Receiver for effective fleet management
- Built-in Bluetooth for hands-free operation
- Applicable Bluetooth profiles:
HSP (Headset Profile provided) and SPP (Serial Port Profile available as an option; availability depends on the model) - Renowned KENWOOD Audio Quality with Active Noise Reduction (ANR) that utilizes built-in DSP
- Software DES and AES Encryptions for Digital protocols
- MIL-STD-810 C/D/E/F/G
| Product Summary TKR-D710/D810 repeater has a DMR Tier II compatible interface, 30 channel capacity, digital display and AIS IP console interface option available with the KTI-5 Interface Box installed and the appropriate IP Network Software. Key Features - DMR Digital Air Interface
- Tier II Conventional - Conventional IP Network - Mixed Mode Operation - Digital / Analog FM
- RF Power Output
??VHF: 50 to 5 Watts ??UHF: 40 to 5 Watts - RF Power Down Detection
- AIS IP Console Interface
- Call Interrupt
Other Features - 30 Channels
- 12.5 kHz Bandwidth
- Two-Slot TDMA Operation
- Two-Digit Numeric Display
- LED Status Indicators
- 6-Programmable Function Keys
- Programmable AUX I/O's
- DTMF Remote Control
| Product Summary The 180-Series premium mobile line (TK-7180/8180) strikes a perfect balance of specifications, features and costs in this broad base platform designed for the public safety, public service, government and private industrial sectors. The wide frequency range, transceiver specifications and power are perfect for both metropolitan and suburban radio systems and environments. The extra large capacity and zone programming facilitate inter-agency interoperability and mutual aid and tactical channel organization. The remote mount option permits easy, aesthetically pleasing installation into existing radio consoles and contemporary sedans. Inversion Scrambling and Encryption provide first level to high level voice security, satisfying homeland security and confidentiality requirements. Emergency Call (front panel & footswitch input) provides distress notification with FleetSync, MDC-1200/G-Star and DTMF ANI formats. The VGS-1 option offers a unique zone / channel voice guide for no-look channel selection and a voicemail function for missed call recording while out of the vehicle. This FleetSync® equipped radio provides PTT ID, Caller ID, and text messaging. The DB-25 and programmable interface I/O's permit interface with mobile status terminals like the KDS-100, or remote control termination panels for base/control station operation.
Below is a brief list of features. For a complete list of product features and specifications, please download the product brochure.
FEATURES
- 136-174 MHz, 30/50W
- 450-520, 400-470 MHz, 30/45W
- 512 Channels / 128 Zones / 512 GID
- 12 Character Alphanumeric LCD
- 6 PF Keys
- Dual Priority Scan
- FleetSync® II
- DTMF & Two-Tone Decode/Encode
- Voice Inversion Scrambler Built-In
- Encryption / ANI Control
- DB-25 Accessory Connector
- PassPort™ NTS Option
- Remote Mount Option
|